EMAIL:
info@velmo.de

Technical Data Locomotive Decoders:

Data format:                                   DCC
Speed levels:                                 alternatively 14, 28 or 128

Typ. supply voltage:                     12 V Digital Track Voltage
Max. supply voltage:                     15 V Digital Track Voltage
Max. continuous current:               500 mA

Ambient temperature in use:        0 °C ... +60 °C
Ambient temperature in storage: -10 °C ... +80 °C

Programming features via configuration variables (CV):

CV 1: Primary Adress
CV 2: Minimum starting voltage
CV 3: Acceleration rate
CV 4: Deceleration rate
CV 5: Maximum speed
CV 8: Reset
CV 9: PWM frequency
CV 17, 18: Extended Adress
CV29: Configuration Data 1
CV49: Configuration Data 2
CV50, 51: Configuration of lights dimming
CV55, 56: Allocation of function key to light
CV60, 61: Configuration of light effects
CV67 to 94: Alternative motor characteristic

Functions:

Function Light:
Switchable front- and backlight, changes with the direction of travel. The lighting of the locomotive is done by maintenance-free LEDs. The LEDs are a part of the decoder and replace the bulbs of the locomotive (not at all decoders). Please refer the features of each locomotive decoder type on the Products page.

Function shunting gear:
The shunting gear allows a fine speed control at low speeds.

Function Emergency Stop
The function emergency stop is configurable in three ways: Emergency stop disabled, emergency stop by pressing the F1 key or emergency stop at change of direction.

Technical Data Function Decoders

Dataformat:                                  DCC

Typ. supply voltage:                     12 V Digital track voltage
Max. Versorgungsspannung:      15 V Digital track voltage
Max. continuous current:              500 mA

Ambient temperature in use:        0 °C ... +60 °C
Ambient temperature in storage: -10 °C ... +80 °C

Programming features via configuration variables (CV):

CV 1: Adress
CV 8: Reset
CV17,18: Extended Adress
CV29: Configuration Data
CV51: Configuration of lights dimming
CV56: Allocation of function key F0-F4 to light
CV40: Allocation of function key F5-F8 to light
CV61: Configuration of light effects

Functions:

Function Light:
Switchable front- and backlight, changes with the direction of travel (only at Engineer’s Cab Wagon).

Function interior lighting:
Switchable interior lighting of wagon. 
 

Technical Data Selectrix* Locomotive Decoders

Part of the VELMO Selectrix* decoders is the SLX831 from Rautenhaus**.
For more technical informationen about this decodertype please also refer to the homepage of Rautenhaus**.

Data format:                                 Selectrix*
Speed levels:                                internal 127

Typ. supply voltage:                     12 V Digital Track Voltage
Max. supply voltage:                     15 V Digital Track Voltage
Max. continuous current:               500 mA

Ambient temperature in use:        0 °C ... +60 °C
Ambient temperature in storage: -10 °C ... +80 °C

Basic Configuration:

Adress
Maximum speed
Acceleration / Deceleration rate
Pulse width (Motor PWM)
Signal stop section definition

Extended Configuration:

Swap connections
Properties of the Acceleration / Deceleration rate
Option of the motorcontrol

Funktions:

Function Light:
Switchable front- and backlight, changes with the direction of travel. The lighting of the locomotive is done by maintenance-free LEDs. The LEDs are a part of the decoder and replace the bulbs of the locomotive (not at all decoders). Please refer the features of each locomotive decoder type on the Products page.

*) Selectrix is a registered trademark of Trix-Modelleisenbahnen GmbH & Co. KG, D-90027 Nürnberg, Germany

**) Rautenhaus is a registered trademark of Rautenhaus Modellbahntechnik; Bürgermeister-Mävers-Str. 2a; 28857 Syke, Germany